Completed project: rebuilding a failing bathtub wall with large-format porcelain

When tile around a tub starts to crack, lift and pull away from the wall, replacing a few tiles rarely solves it. This bathroom had an older tile surround that was failing at the tub, with the wall behind it showing years of old adhesive and damage. The right fix was to take it back to the bones and rebuild.
What the old wall looked like

Once the old tile came off, the wall was patchy with old adhesive and damaged surfaces. Where the wall met the tub, the tile was already cracking away, which is exactly where water gets in.

Opening the wall
Behind the tile was a concrete block wall with the plumbing running through it. Opening it up let us see the supply lines and drains clearly, replace what was needed, and build a flat, solid surface for the new tile to sit on.

We then framed a new wall in front of the block, fitted moisture-resistant backer board, and kept the plumbing accessible.

Large-format porcelain, with a way back in
The finished wall uses large-format porcelain tile, which means fewer grout lines and a cleaner, easier-to-wipe surface. At the valve, we left an access panel built into the tile layout, so future plumbing work does not mean breaking tile.


Fewer joints, better waterproofing behind the tile and a tidy plumbing access: that is what rebuilding properly, rather than patching, gets you. Read more about tile prep in our tile renovation guide for Richmond Hill.
Tile starting to fail around your tub? Request a free estimate and we will look at the job and quote it clearly before we start.
Need a hand with a project?
Book the VOL Handyman team for the work in this article, or anything else around your home or business.



